pr26mf12nsz/ PR36MF12NSZ series pr26mf12nsz/PR36MF12NSZ series model line-up outline dimensions (unit : mm) for 200v line for 100v line no built-in zero- cross circuit built-in zero- cross circuit pr26mf12nsz ? PR36MF12NSZ ? (pr36mf12ysz) pr36mf22nsz ? (pr36mf22ysz) ? vde (vde0884) approved type absolute maximum ratings *1 the derating factors of absolute maximum ratings due to ambient temperature are shown in fig.1, 2, 3, 4 *2 40 to 60%rh, ac for 1 minute, f = 60hz parameter symbol rating unit forward current i f 50 0.6 ma reverse voltage rms on-state current peak one cycle surge current input pr26mf12nsz PR36MF12NSZ pr36mf22nsz output v r 6v a v i surge 6 (50hz sine wave) 600 400 a v drm v iso (rms) i t (rms) kv isolation voltage operating temperature t opr ? 40 to + 125 ? 25 to + 85 ? 30 to + 85 c c storage temperature t stg *2 *1 *1 soldering temperature t sol 260 (for 10s) 4.0 c (t a = 25 c) pr26mf12nsz PR36MF12NSZ pr36mf22nsz repetitive peak off- state voltage 1. various types of home appliances features applications 8-pin dip type ssr for low power control 1. compact 8-pin dual-in-line package type 2. rms on-state current i t (rms) :0.6a 3. low minimum trigger current (i ft 5ma) 4. built-in zero-cross circuit (pr36mf22nsz) 5. high repetitive peak off-state voltage pr26mf12nsz v drm :min. 400v PR36MF12NSZ/pr36mf22nsz v drm :min. 600v 6. isolation voltage between input and output (v iso (rms) :4kv) 7. recognized by ul (no. e94758) 8. recognized by csa (no. lr63705) 9. vde (vde0884) approved type (pr36mf12ysz, pr36mf22ysz) is also available as an option notice in the absence of confirmation by device specification sheets, sharp takes no responsibility for any defects that may occ ur in equipment using any sharp devices shown in catalogs, data books, etc. contact sharp in order to obtain the latest device specification sheets before usin g any sharp device. internet internet address for electronic components group http://sharp-world.com/ecg/ terminal , and are common ones of cathode.to radiate the heat, solder all of the lead pins on the pattern of pwb. internal connection diagram pr36mf22nsz pr26mf12nsz/ PR36MF12NSZ ? zero-cross circuit anode mark (model no.) r26mf1 r36mf1 r36mf2 ? zero-cross circuit for (pr36mf22nsz) : 0 to 13 ? 2.54 0.25 6.5 0.5 1.2 0.3 9.66 0.5 3.5 0.5 7.62 0.3 2.9 0.5 3.25 0.5 0.5 0.1 0.5 typ. 0.26 0.1 8 a a 6 5 1 2 3 4 1 1 3 4 8 6 5 2 3 4 1 8 6 5 2 3 4 cathode anode cathode cathode g t 1 t 2 1 2 3 4 5 6 8 2 rank mark brand name "s"
pr26mf12nsz/PR36MF12NSZ series parameter conditions input forward voltage i f = 20ma i f = 10ma, r load on-state voltage output v d = 6v critical rate of rise of off-state voltage v d = 1/ ? 2 ? v drm transfer charac- teristics minimum trigger current v d = 6v, r l = 100 ? v d = 6v, r l = 100 ? , i f = 10ma min. ? ? ? 100 5 10 10 typ. 1.2 ? ? 10 11 max. 1.4 3.0 25 ?? ? holding current symbol v f v t v ox i h dv/dt i ft isolation resistance r iso i t = 0.6a unit v reverse current v r =3v v d =v drm i r repetitive peak off-state current i drm ma ?? 10 a ?? 100 a v/ s ? ? 5 ma ? v ?? 35 v (t a = 25 ? c) turn-on time ?? 100 50 t on s dc = 500v, 40 to 60%rh pr26mf12nsz/PR36MF12NSZ pr36mf22nsz pr36mf22nsz zero-cross voltage electrical characteristics 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 ? 25 ? 20 ? 100 102030405060708090100 rms on-state current i t (rms) (a) ambient temperature t a ( ? c) 0 10 20 30 40 50 60 70 ? 25 ? 20 ? 100 102030405060708090100 forward current i f (ma) ambient temperature t a ( ? c) fig.1 rms on-state current vs. ambient temperature (pr26mf12nsz/PR36MF12NSZ) fig.3 forward current vs. ambient temperature (pr26mf12nsz/PR36MF12NSZ) ? 30 ? 20 ? 100 102030405060708090100 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 rms on-state current i t (rms) (a) ambient temperature t a ( ? c) 0 10 20 30 40 50 60 70 ? 30 ? 20 ? 100 102030405060708090100 forward current i f (ma) ambient temperature t a ( ? c) fig.2 rms on-state current vs. ambient temperature (pr36mf22nsz) fig.4 forward current vs. ambient temperature (pr36mf22nsz)
pr26mf12nsz/PR36MF12NSZ series 1 1.2 1.1 1.4 1.3 1.5 1.6 ? 40 0 ? 20 20 40 60 80 120 100 on-state voltage v t (v) ambient temperature t a ( ? c) i t = 0.6a 10 10 2 10 3 ? 30 0 20406080100 relative holding current i h (t ? c) / i h (25 ? c) 100% ambient temperature t a ( ? c) v d = 6v fig.8 on-state voltage vs. ambient temperature (pr26mf12nsz/PR36MF12NSZ) fig.10 r elative holding current vs. ambient temprature (pr26mf12nsz/PR36MF12NSZ) 50 20 5 2 1 100 10 forward current i f (ma) forward voltage v f (v) ? 25 ? c 25 ? c 0 ? c t a = 75 ? c 50 ? c 1 0.9 1.1 1.2 1.3 1.4 1.5 0 1 2 3 4 6 5 minimum trigger current i ft (ma) ambient temperature t a ( ? c) v d = 6v r l = 100 ? ? 30 ? 10 0 ? 20 20 40 60 80 100 10 30 50 70 90 fig.5 forward current vs. forward voltage fig.6 minimum trigger current vs. ambient temperature (pr26mf12nsz/PR36MF12NSZ) fig.9 on-state voltage vs. ambient temperature (pr36mf22nsz) fig.7 minimum trigger current vs. ambient temperature (pr36mf22nsz) 0.8 1 0.9 1.2 1.1 1.3 1.4 ? 30 0 20406080100 on-state voltage v t (v) ambient temperature t a ( ? c) i t = 0.6a minimum trigger current i ft (ma) ambient temperature t a ( c) ? 30 0 ? 20 ? 10 20 40 60 80 100 10 30 50 70 90 0 1 2 3 4 6 5 v d =6 v r l = 100 ?
pr26mf12nsz/PR36MF12NSZ series fig.14 on-state current vs. on-state voltage (pr36mf22nsz) fig.11 relative holding current vs. ambient temperature (pr36mf22nsz) fig.12 zero-cross voltage vs. ambient temperature (pr36mf22nsz) 0 0.2 0.4 0.6 0.8 1 1.2 0 0.5 1 1.5 on-state current i t (a) on-state voltage v t (v) i f = 20ma t a = 25 ? c 10 10 2 10 3 ? 30 0 20406080100 relative holding current i h (t ? c) / i h (25 ? c) 100% ambient temperature t a ( ? c) v d = 6v 0 10 5 15 ? 30 0 ? 20 ? 10 20 40 60 80 100 10 30 50 70 90 zero-cross voltage v ox (v) ambient temperature t a ( ? c) r load, i f = 10ma 0 0.2 0.4 0.6 0.8 1 1.2 0 0.5 1 1.5 2 on-state current i t (a) on-state voltage v t (v) i f = 20ma t a = 25 ? c 100 10 1 v d = 6v r l = 100 ? t a = 25 ? c forward current i f (ma) turn-on time t on ( s) 100 12030 40 50 10 5 fig.13 on-state current vs. on-state voltage (pr26mf12nsz/PR36MF12NSZ) fig.15 turn-on time vs. forward current (pr26mf12nsz/PR36MF12NSZ) fig.16 turn-on time vs. forward current (pr36mf22nsz) 1 000 100 10 1 100 v d = 6v r l = 100 ? t a = 25 ? c 12030 40 50 10 5 forward current i f (ma) turn-on time t on ( s)
notice the circuit application examples in this publication are provided to explain representative applications of sharp devices and are not intended to guarantee any circuit design or license any intellectual property rights. sharp takes no responsibility for any problems related to any intellectual property right of a third party resulting from the use of sharp's devices. contact sharp in order to obtain the latest device specification sheets before using any sharp device. sharp reserves the right to make changes in the specifications, characteristics, data, materials, structure, and other contents described herein at any time without notice in order to improve design or reliability. manufacturing locations are also subject to change without notice. observe the following points when using any devices in this publication. sharp takes no responsibility for damage caused by improper use of the devices which does not meet the conditions and absolute maximum ratings to be used specified in the relevant specification sheet nor meet the following conditions: (i) the devices in this publication are designed for use in general electronic equipment designs such as: - - - personal computers - - - office automation equipment - - - telecommunication equipment [terminal] - - - test and measurement equipment - - - industrial control - - - audio visual equipment - - - consumer electronics (ii) measures such as fail-safe function and redundant design should be taken to ensure reliability and safety when sharp devices are used for or in connection with equipment that requires higher reliability such as: - - - transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.) - - - traffic signals - - - gas leakage sensor breakers - - - alarm equipment - - - various safety devices, etc. (iii)sharp devices shall not be used for or in connection with equipment that requires an extremely high level of reliability and safety such as: - - - space applications - - - telecommunication equipment [trunk lines] - - - nuclear power control equipment - - - medical and other life support equipment (e.g., scuba). if the sharp devices listed in this publication fall within the scope of strategic products described in the foreign exchange and foreign trade law of japan, it is necessary to obtain approval to export such sharp devices. this publication is the proprietary product of sharp and is copyrighted, with all rights reserved. under the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of sharp. express written permission is also required before any use of this publication may be made by a third party. contact and consult with a sharp representative if there are any questions about the contents of this publication.
|
